Backup Configuration

Backup Configuration

The Backup Configuration interface allows system administrators to customize their scheduled backups.

Warning:

We strongly recommend that you only use the Backup Configuration interface to configure backups of your server. We plan to remove the Legacy Backup Configuration interface (Home >> Backup >> Legacy Backup Configuration) from WHM in a future release.

Note:

The system applies the current Backup Configuration settings to accounts that you create or transfer.

To enable and run backups, you must complete both of the following steps:

Select Enable for the Backup Status setting in this interface's Global Settings section.
Select your desired settings for the Backup Configuration feature.
Use the Backup User Selection interface (Home >> Backup >> Backup User Selection) to enable backups for each desired cPanel user.

Note:

To enable or disable the Backup Configuration feature for all users, select the checkbox in the top right corner of the Backup User Selection interface.

Global Settings

You can configure the following global backup settings:

Setting	Description
Backup Status	Enable this setting to run the updated Backup Configuration feature. This setting defaults to Enable.
Backup Type	Choose one of the following options to determine how the system stores backup files: Compressed — Select this setting to save all of your information in a compressed format. This setting uses less disk space, but requires more time to complete. Uncompressed — Select this setting to save all of your information in an uncompressed format. This setting uses more disk space, but is faster than Compressed backups. Incremental — Select this setting to store only one uncompressed backup file. The system saves updated account information to the existing backup file, and remove the old information that these updates replace. This setting limits your restoration settings, but runs faster and uses less disk space than other backup types. Warning: If you choose to use Incremental backups, you cannot restore the account to a time before your last backup.
Maximum destination timeout in seconds	Enter the maximum number of seconds to allow a backup process to upload a single backup file or restore a single backup file. Note: We strongly recommend that you enter a number of seconds that is large enough for the system to upload your largest backup file.

Setting

Description

Backup Status

Enable this setting to run the updated Backup Configuration feature. This setting defaults to Enable.

Backup Type

Choose one of the following options to determine how the system stores backup files:

Compressed — Select this setting to save all of your information in a compressed format. This setting uses less disk space, but requires more time to complete.
Uncompressed — Select this setting to save all of your information in an uncompressed format. This setting uses more disk space, but is faster than Compressed backups.
Incremental — Select this setting to store only one uncompressed backup file. The system saves updated account information to the existing backup file, and remove the old information that these updates replace. This setting limits your restoration settings, but runs faster and uses less disk space than other backup types.

Warning:

If you choose to use Incremental backups, you cannot restore the account to a time before your last backup.

Maximum destination timeout in seconds

Enter the maximum number of seconds to allow a backup process to upload a single backup file or restore a single backup file.

Note:

We strongly recommend that you enter a number of seconds that is large enough for the system to upload your largest backup file.

Scheduling and Retention

The Scheduling and Retention settings allow you to specify when the backup process runs. You may choose to run backups on a daily, weekly, or monthly basis, or you may use a combination of these settings. Select the checkboxes that correspond to the timing settings that you wish to use.

Note:

You must select at least one of the following settings.

Setting	Description
Backup Daily	Your system creates a new backup on each of the days of the week that you select. When you select this setting, you must also configure the following settings: Select the days of the week on which you wish to run backups. In the Retain Daily backups text box, enter the maximum number of daily backup files to store on your system at any given time. Enter any number between `1` and `9999`.
Backup Weekly	Your system creates a new backup once each week, on the day that you select. When you select this setting, you must also configure the following settings: Select the day of the week on which you wish to run backups. In the Retain Weekly backups text box, enter the maximum number of weekly backups to store on your system at any given time. Enter any number between `1` and `9999`.
Backup Monthly	Your system creates a new backup either once or twice per week, on the days of the month that you select. When you select this setting, youmust also configure the following settings: Select the day or days of the month on which you wish to run backups. In the Retain Monthly backups text box, enter the maximum number of monthly backups to store on your system at any given time. Enter any number between `1` and `9999`. Note: If you run daily and monthly backups on the same day, the daily backup runs first, and then the monthly backup copies the daily backup.

Setting

Description

Backup Daily

Your system creates a new backup on each of the days of the week that you select. When you select this setting, you must also configure the following settings:

Select the days of the week on which you wish to run backups.
In the Retain Daily backups text box, enter the maximum number of daily backup files to store on your system at any given time. Enter any number between 1 and 9999.

Backup Weekly

Your system creates a new backup once each week, on the day that you select. When you select this setting, you must also configure the following settings:

Select the day of the week on which you wish to run backups.
In the Retain Weekly backups text box, enter the maximum number of weekly backups to store on your system at any given time. Enter any number between 1 and 9999.

Backup Monthly

Your system creates a new backup either once or twice per week, on the days of the month that you select. When you select this setting, youmust also configure the following settings:

Select the day or days of the month on which you wish to run backups.
In the Retain Monthly backups text box, enter the maximum number of monthly backups to store on your system at any given time. Enter any number between 1 and 9999.

Note:

If you run daily and monthly backups on the same day, the daily backup runs first, and then the monthly backup copies the daily backup.

Files

The Files settings allow you to configure the information that you wish to back up. Select the checkboxes that correspond to the settings that you wish to use.

Warning:

You must select either the Backup Accounts or Backup System Files checkbox in order to run backups.

Setting	Description
Backup Accounts	Back up the user files in each cPanel user's home directory. Note: Click Select Users to open the Backup User Selection interface (Home >> Backup >> Backup User Selection). After you select this setting, select the type of data to include in the backup file: Backup Suspended Accounts — Select the Enable button to back up suspended accounts. Warning: If you do not enable this option, your server will not back up suspended accounts, regardless of their settings in the Backup User Selection interface ( Home >> Backup >> Backup User Selection ). Backup Access Logs — Select the Enable button to back up your server's access logs and the `/usr/local/cpanel/domlogs` file. Backup Bandwidth Data — Select the Enable button to back up your server's bandwidth data. Use Local DNS — Select the method to use to back up DNS information: Disable — The system backs up DNS information from the DNS cluster. Enable — The system backs up DNS information from the server for the domain.
Backup System Files	Back up your server's system files. Notes: The system stores many of these files in the `/etc` directory. You must enable this setting for server restoration, but it is not necessary for account restoration. We strongly recommend that you enable this setting. For more information, read our System Backups documentation.

Setting

Description

Backup Accounts

Back up the user files in each cPanel user's home directory.

Note:

Click Select Users to open the Backup User Selection interface (Home >> Backup >> Backup User Selection).

After you select this setting, select the type of data to include in the backup file:

Backup Suspended Accounts — Select the Enable button to back up suspended accounts.

Warning:

If you do not enable this option, your server will not back up suspended accounts, regardless of their settings in the Backup User Selection interface ( Home >> Backup >> Backup User Selection ).
Backup Access Logs — Select the Enable button to back up your server's access logs and the /usr/local/cpanel/domlogs file.
Backup Bandwidth Data — Select the Enable button to back up your server's bandwidth data.
Use Local DNS — Select the method to use to back up DNS information:
- Disable — The system backs up DNS information from the DNS cluster.
- Enable — The system backs up DNS information from the server for the domain.

Backup System Files

Back up your server's system files.

Notes:

The system stores many of these files in the /etc directory.
You must enable this setting for server restoration, but it is not necessary for account restoration. We strongly recommend that you enable this setting.
For more information, read our System Backups documentation.

Databases

Select one of the following options for the Backup SQL Databases setting, to determine how to back up SQL databases:

Setting	Description
Per Account Only	Only back up the databases for each account. This setting uses the `mysqldump` utility.
Entire MySQL Directory	Back up all of the databases on the server. This backs up the entire `/var/lib/mysql/` directory.
Per Account and Entire MySQL Directory	Perform a comprehensive backup that copies all of the databases for each individual account, as well as all of the databases on the server.

Configure Backup Directory

The following settings allow you to specify where you wish to save your backups.

Warning:

We strongly recommend that you save your backups to a remote location in addition to a local destination.
If you do not select the Retain backups in the default backup directory setting and do not specify a destination in the Additional Destinationssetting, the system will return the following error: Error: Nowhere to back up: no enabled destinations found and retaining local copies is disabled.
The backup process and the transfer process use separate queues. If each backup finishes much faster than each transfer, backup files can accumulate on the server and fill the hard drive.
Perform backups to NFS mount points at your own risk. If you choose a NFS mount point, you risk data loss if there is a network interruption or if you did not properly configure NFS.
To prevent performance degradation, the system automatically disables quotas on non-root filesystems that contain a backup destination.

Setting	Description
Default Backup Directory	To change the default backup directory, enter the absolute path to the desired directory location. Note: By default, the system saves backup files locally, to the `/backup/` directory.
Retain backups in the default backup directory.	Select this checkbox to retain each account backup in the `/backup/` directory after the backups transfer to another destination. If you do not select this setting, your server deletes account backup files from the `/backup/` directory only after the following events occur: The system successfully transfers the backup file to at least one additional destination. The system attempts, successfully or unsuccessfully, to transfer the backup file to all of your additional destinations. Note: This setting does not cause the system to remove system backup files, directories, or other files.
Mount Backup Drive as Needed.	Select the Enable button to mount a backup drive. This setting requires a separate mount point and causes the Backup Configuration process to check the `/etc/fstab` file for a backup mount. If a mount exists with the same name as the staging directory, the Backup Configuration process mounts the drive and backs up the information to the mount. After the backup process finishes, it dismounts the drive. If you select the Disable button, the Backup Configuration process does not check the `/etc/fstab` file for a mount.

Setting

Description

Default Backup Directory

To change the default backup directory, enter the absolute path to the desired directory location.

Note:

By default, the system saves backup files locally, to the /backup/ directory.

Retain backups in the default backup directory.

Select this checkbox to retain each account backup in the /backup/ directory after the backups transfer to another destination.

If you do not select this setting, your server deletes account backup files from the /backup/ directory only after the following events occur:

The system successfully transfers the backup file to at least one additional destination.
The system attempts, successfully or unsuccessfully, to transfer the backup file to all of your additional destinations.

Note:

This setting does not cause the system to remove system backup files, directories, or other files.

Mount Backup Drive as Needed.

Select the Enable button to mount a backup drive. This setting requires a separate mount point and causes the Backup Configuration process to check the /etc/fstab file for a backup mount.

If a mount exists with the same name as the staging directory, the Backup Configuration process mounts the drive and backs up the information to the mount.
After the backup process finishes, it dismounts the drive.

If you select the Disable button, the Backup Configuration process does not check the /etc/fstab file for a mount.

Additional Destinations

You can save your backups to additional destinations. Each additional destination may increase the amount of time that the backup process requires. If the process runs too long, it may interfere with the next backup process.

Notes:

To restore backups that exist in the additional destinations that you create, perform a remote restoration. For more information, read our Remote Restoration documentation.
If you use the Incremental backup type, you cannot add additional destinations.
To save your updated destination but not validate your changes, click Save Destination.
To automatically validate your information after you save your changes, click Save and Validate Destination.

Select a destination type from the menu and click Create new destination. A new section for the selected destination type will appear.

Warning:

Only transfer system backup files over encrypted connections. The following destination types use encrypted connections:

Amazon S3™
SFTP
WebDAV with SSL Enabled

The Additional Local Directory type does not transfer your data from the server, so that method is secure.

Select a tab to view information for that destination type:

Setting	Description
Destination Name	Enter a destination name for your backup files. This name appears in your destination table.
Transfer System Backups to Destination	Select this checkbox to transfer system backups to an additional destination. Warning: Only transfer system backup files over encrypted connections.
Folder	Enter the name of the folder in which you wish to store your backups. Make certain that the folder is in the bucket that you enter in the Bucket text box. Note: This setting is optional.
Bucket	Enter the name of the bucket in which you wish to store your backup. Note: A bucket is the container in which your Amazon S3 folders and files reside. You must create your bucket in the Amazon S3 management console.
Access Key ID	After you generate an access key, enter the access key ID in this text box. Your server uses the access key to authenticate with the Amazon S3 account.
Secret Access Key	After you generate an access key, enter the secret access key in this text box. Unless you specify a new password, the server uses the existing password.
Timeout	Enter the maximum amount of time in seconds that you want the server to wait for a response from the remote server before it generates errors. You must enter a number between `30` and `300`. If the server does not respond in this time frame, it makes two additional attempts to contact the server. If the server does not respond after those attempts, the system administrator receives an email that notes the failed attempts, and the system attempts a transfer again the next time that backups run.

Save Configuration

After you configure the desired settings, click Save Configuration at the bottom of the Backup Configuration interface.

To reset all of the settings in the Backup Configuration interface to the default settings, click Reset.

Run backups manually

To run a backup manually, run the following command:

/usr/local/cpanel/bin/backup

If the backup is up-to-date but you still wish to perform a backup, run the following command:

/usr/local/cpanel/bin/backup --force

To use a custom packaging script, perform the following steps:

Copy the /usr/local/cpanel/scripts/pkgacct file and modify it.
Store the modified pkgacct file in the /var/cpanel/lib/Whostmgr/Pkgacct/pkgacct directory.
Run the /usr/local/cpanel/bin/backup command with the --allow-override flag.

מאגר מידע

קטגוריות

קטגוריות

Global Settings

Scheduling and Retention

Files

Databases

Configure Backup Directory

Additional Destinations

Save Configuration

Run backups manually

מאמרים קשורים

פניות ומידע

מאגר מידע

קטגוריות

קטגוריות